MMC ASA (Mitsubishi Aftersales Support Application) is a new shell was launched in 2007 to replace Wincaps. MMC ASA - Mitsubishi Wincaps (CAPS) USA / EUR / JAP / Generalworks on the new (relatively) operating system, the caps had a problem, I checked the work in win xp, vista, xp x64, vista x64Electronic Catalogue Mitsubishi ASA is fully installed on the hard drive is 700 Mb to 1.5 Gb hard drive. 4 regions occupy 4.8 Gb hard drive.In the catalog of auto parts Mitsubishi (Mitsubishi) has a search on VIN code, choice of models, spare parts search for the original order number, name, there is the applicability of parts Mitsubishi.
This is the Original parts lookup system mitsubishi used during the production of these cars. You can lookup cars by VIN, or by model and trim and look at illustrations and part numbers as well as cross reference parts with other cars.This REQUIRES 32 bit version of windows. If you have 64 bit then this will not work.
mitsubishi caps downloads
All information on this site, including pricing, features, packages and additional equipment is current at the time of publishing and is subject to change without notice. For the latest information, please visit www.mitsubishicars.com.
Saturns can use the 1108/1118 adapter for those that use the 1/6 twist to lock caps. If it use a female threaded cap that screws on 1.5 to 2 full turns and is 45mm (1.75") inner diameter it will use the 1100 or 1109 adapter.
Nearly every European made car can use the 1100 and 1109 caps that are included in the 0100 and 0109 kits. These caps are female threaded caps and have an inner diameter at the threads of 45mm. BMW, Porsche, Saab, Volvo, VW (except air cooled) have used this type of cap since the late 1950s. Most other european cars also use this cap with some exceptions. Ferrari on some models and years will use a slightly smaller cap that is 42mm inner diameter. If you have a European made cars with a female threaded cap will more than likely use the 1100 and 1109 caps, but please check the inner diameter of the cap to be sure.
If your cap is not similar to the 1107/1117 then you can probably either use the European type caps or use the universal adapter 1101 that is included with kit 0101. If it is a round threaded cap with a 45mm inner diameter it can use the European 0100/0109 kits which include the 1100/1109 adapters. If it is not similar to the European or the Ford cap then you will need to use the 0101 universal Kit - also please check that the brake fluid reservoir is easily accessible and that it is not under the cowl as the 0101 and 0119 requires easy access to the brake fluid reservoir. If you have any questions please call or email.
Honda and Acura - Honda uses two size reservoirs. One reservoir is approximately 2.5" in diameter - that one uses the 1101 cap which comes with kit 0101. The other reservoir is about 3" in diameter. It uses cap 1119 which comes with kit 0119. You can use the 0119 on both size reservoirs, however the 0101 will only work on the smaller Reservoirs. Stock caps CAN NOT be modified to work with our bleeders due to the configuration of the stock reservoir, they expand when pressurized and cause the stock cap to leak. Please check that the brake fluid reservoir is easily accessible and that it is not under the cowl as the 1101 and the 1119 requires easy access to the brake fluid reservoir.
Mazda Mazda seems to change caps from model year and version of their vehicles. We have seen the 1100, 1109, 1107, and the 1118 work on different Mazdas. Our best advice is to measure the inner diameter of the caps and compare those measurements to the pictures found at this webpage. Most twist to lock caps will be the 1118 however some cars can use the 1107. It would be best to compare measurements found on the page.
Toyota and Lexus- The majority of Toyotas and Lexus models use a reservoir cap that is a push to seal cap. It doesn't screw on or twist to lock. Some Toyotas and Lexus use a cap that has two locking tabs that engage inside the reservoir neck. Both of these types of caps will need to use the Universal Round kit 0101 which comes with adapter 1101 or the metal version the 0119 which comes with the 1119 adapter. Note - if the reservoir is under the cowl the 1101 or 1119 will not work. Also some Toyota and Lexus use an integrated master cylinder abs unit where the ABS unit is either directly below the master cylinder or attached to the side. We do not have a kit that works with those vehicles.
We don't make many motorcycle adapters as the manufacturers use way to many variants. For example - Honda on their cars use 2 different caps since 1980. On their motorcycles probably 40-50 different caps. 2ff7e9595c
Comments